如何使用高壓清洗機？

How to use a high-pressure cleaning machine?

　　1、作業準備：

1. Homework preparation:

　　（1）使用前應放開纏繞著或扭曲的高壓喉管，避免任何硬物重壓喉管。

(1) Before use, the high-pressure throat that is wrapped or twisted should be released to avoid any hard objects from exerting heavy pressure on the throat.

　　（2）確認水源正常。

(2) Confirm that the water source is normal.

　　（3）確認機油量適中。

(3) Confirm that the oil level is appropriate.

　　2、作業過程：

2. Homework process:

　　（1）先打開水源，再啟動機器。

(1) Turn on the water source first, then start the machine.

　　（2）將機器推至需要清洗的地方，包括護欄、電線桿、路燈柱等上的廣告約，對準目標，扣動扳手，進行清洗作業；

(2) Push the machine to the area that needs to be cleaned, including advertisements on guardrails, utility poles, street lamp posts, etc., align with the target, use a wrench, and carry out cleaning operations;

　　（3）沖完后，待清掃工人將沖落的雜物清除后，將污水沖入水道。

(3) After flushing, wait for the cleaning workers to remove the washed debris and then flush the sewage into the waterway.

　　（4）清理完畢后，松回扳手，推動車輛進行下一處作業。

(4) After cleaning, loosen the wrench and push the vehicle to proceed to the next task.

　　3、作業結束

3. Homework completed

　　（1）機械停止作業時，釋放機內動力后，關閉水源。

(1) When the machinery stops working, release the internal power and turn off the water source.

　　（2）填寫作業日志。

(2) Fill in the homework log.

本文由 通過式噴淋清洗機 為您精心提供，如想了解更多請點擊我們的網站：http://m.400qy.cn，我們將會以最大的熱情為您解答!

This article is carefully provided by the through type spray cleaning machine. If you want to learn more, please click on our website: http://m.400qy.cn We will answer you with the greatest enthusiasm!